Lanbao LR6.5Q-DC 1.5mm 2-Wire Inductive Sensor

Lanbao LR6.5Q-DC 1.5mm 2-Wire Inductive Sensor

Lanbao LR6.5Q-DC 2-Wire Series is a compact cylindrical inductive proximity sensor for non-contact metal detection in space-limited control cabinets, fixtures, and automation equipment. The M6.5 stainless-steel housing, 1.5mm flush sensing distance, and DC 2-wire output make it a practical choice when the wiring layout requires a simple two-wire sensor loop.

This listing covers LR6.5QBF15DLO and LR6.5QBF15DLC variants, with normally-open or normally-closed output logic. Cable-output and E1 M8-connector versions are available, helping users choose between fixed wiring and faster replacement during maintenance.

For related Lanbao inductive sensors, compare the Lanbao LR6.5-Y Extended Distance Sensor, Lanbao LR08-DC 3-Wire Inductive Sensor, and Lanbao LR12X-DC 3/4-Wire Inductive Sensor. For photoelectric detection options, see the Lanbao PSE Photoelectric Sensor Family.

Technical Specifications

Brand	Lanbao
Series	LR6.5Q-DC 2-Wire Series
Sensor Type	Inductive proximity sensor
Housing Size	M6.5 cylindrical housing
Housing Material	Stainless steel
Installation Type	Flush mounting
Rated Sensing Distance	1.5mm
Assured Operating Distance	0-1.2mm reference
Power Supply	10-30V DC
Output Type	DC 2-wire
Output Logic	Normally open or normally closed, depending on selected variant
Standard Target	Fe 8 x 8 x 1t reference
Switching Frequency	1000Hz reference
Load Current Reference	<=100mA
Residual Voltage Reference	<=8V
Leakage Current Reference	<=1mA
Current Consumption	<=10mA reference
Output Indicator	Yellow LED
Operating Temperature	-25C to 70C
Protection Rating	IP67 reference
Connection Options	2m PVC cable or E1 M8 connector version, depending on selected variant
Available Variants	LR6.5QBF15DLO, LR6.5QBF15DLC, LR6.5QBF15DLO-E1, LR6.5QBF15DLC-E1

Integration Notes & Hardware Guidance

• Two-wire wiring: Use the sensor in a compatible DC 2-wire input loop and confirm that the controller input can tolerate residual voltage and leakage current.
• Logic selection: Choose DLO for normally-open output or DLC for normally-closed output according to the required signal state.
• Mounting distance: Keep the metal target within the assured operating range and avoid mechanical contact with the sensing face.
• Flush installation: This model is designed for flush mounting, but nearby metal and target size can still affect switching distance.
• Connection choice: Select cable variants for fixed wiring or E1 M8 connector variants when faster sensor replacement is important.

Packing List

Item	Qty	Notes
Lanbao LR6.5Q-DC 2-wire inductive proximity sensor	1	Selected NO / NC, cable or E1 connector variant
Original product packaging	1	Packaging may vary by shipment batch

FAQ

What does the LR6.5Q-DC 2-wire sensor detect?

It detects metal targets using inductive proximity sensing, without physical contact with the target.

What is the sensing distance?

This listing uses 1.5mm flush sensing variants, with an assured operating distance reference of 0-1.2mm.

What is the difference between DLO and DLC?

DLO indicates normally-open output, while DLC indicates normally-closed output. Choose the logic that matches your controller signal requirement.

Is this the same as a 3-wire NPN or PNP sensor?

No. This is a DC 2-wire sensor. Check that your controller input is compatible with 2-wire sensor residual voltage and leakage current before installation.

What is the difference between cable and E1 variants?

Cable variants use a fixed 2m PVC cable, while E1 variants use an M8 connector-style connection for easier replacement and maintenance.