Lanbao QE12-N5 | Connection Cable | IP67

Lanbao QE12-N5 – industrial sensor connection cable

The Lanbao QE12-N5 is a industrial sensor connection cable built for sensor wiring and field connection in industrial automation equipment. Lanbao’s official specification lists 2m / 5m, 2m; 5m (based on current SKU options), and 250VAC/DC. This OpenELAB listing describes the currently selectable SKUs, so pin count, output, cable length, interface, and any M-suffix variant should always be checked against the variant name before ordering.

For selection, confirm the connector format, electrical rating, protection rating, material, cable or measuring range, and exact SKU before installation under real machine conditions. If you are comparing nearby Lanbao items, also review Lanbao QE12-N3, Lanbao QE12-N4, and Lanbao QE8 so the accessory, sensor, or master station matches the existing machine wiring and controller input.

Technical Specifications

Parameter	Value
Model family	QE12-N5
Product type	industrial sensor connection cable
Current SKU coverage	Lanbao-QE12-N5F2; Lanbao-QE12-N5F5
Core function	sensor wiring and field connection
Range / length / interface	2m / 5m
Output / variant coverage	2m; 5m (based on current SKU options)
Supply voltage	250VAC/DC
Rated / nominal current	4A
Connection / interface	See selected SKU
Protection rating	IP67
Material	PVC/PU
Cable / housing detail	5.2mm
Temperature range	-30..90
Indicator / built-in function	See official specification

Board Layout & Label Guide

• Product marking – Match model QE12-N5 and the selected SKU against the label, connector marking, or order line.
• Connection area – See selected SKU; route cable and connector strain relief before commissioning.
• Variant coverage – 2m; 5m (based on current SKU options).
• Supply input – Operate only within 250VAC/DC.
• Indicator / label area – Use LED status or printed markings to confirm power, signal state, or selected function.
• Mechanical mounting – Install the connector, cable jacket, housing, or master station without bending, pulling, or twisting stress.
• Protection rating – IP67; keep mating surfaces and seals clean.
• SKU selection – Select pin count, cable length, output, interface, or M-suffix variant from the exact SKU.

Packing List

• 1 x selected item

FAQ

Q: What is the main function of the Lanbao QE12-N5?
A: It is a industrial sensor connection cable for sensor wiring and field connection.

Q: Which variant should I order?
A: Choose by current SKU coverage: 2m; 5m (based on current SKU options).

Q: Which length or measurement range applies?
A: Use 2m / 5m and the exact SKU on your order as the final reference.

Q: Which power supply should I use?
A: Use 250VAC/DC and confirm wiring before applying power.

Q: Is the protection rating suitable for industrial equipment?
A: The official protection rating is IP67; installation and mating connectors still matter.

Q: Are all listed variants included together?
A: No. The shipped item follows the selected store SKU, not every variant named in the family description.

Q: What should I check before commissioning?
A: Check SKU, pin count, output, supply voltage, cable strain relief, connector seating, and indicator state.

Q: Where should final parameters be verified?
A: Use the official Lanbao specification page and the SKU shown on your OpenELAB order.