SLAMTEC Mapper M2M3 LiDAR Laser Mapping Sensor with SLAM, ROS Support, WiFi/Ethernet, 40m Range

Overview

The SLAMTEC Mapper M2M3 LiDAR is a laser mapping sensor designed for map building and real-time localization. It integrates a SLAM engine and a laser range scanner, supporting plug-and-play operation with USB power and providing mapping/localization data for robotics and surveying workflows.

It is also designed to be used as a laser range scanner, with SDK/ROS integration options for bringing range data into an existing system.

Key Features

• Built-in mapping and localization capability (SLAM-based map building and real-time localization/navigation).
• Large-scenario, high-quality mapping with SLAM graph optimization and SharpEdge mapping technology.
• Tilting compensation and fast moving: built-in inertial navigation system (nine degrees of freedom); supports maximum moving speed of 2 m/s and inclination angle 3.
• Indoor and outdoor availability (including outdoor environments with direct daylight).
• Fully compatible with ROS for data analysis; cross-platform SDK and tools for phone and PC; ROS driver support and RViz workflow shown.
• Built-in WiFi (access point and station modes) and 100M Ethernet for communication; real-time map/localization data via a mobile application.
• Compact design icons shown: small size, low power, multiple work modes, compatible SLAMTEC ecosystem.

Specifications

Model	SLAMTEC Mapper M2M3
Distance Range	40 m
Sample Rate	10 kHz
Maximum Area	300 m * 300 m
Mapping Resolution	0.05 m
Maximum Moving Speed	2 m/s
Maximum Rotation Speed	TBD
Accuracy	< 0.02 m
Graph Optimizing Working Time	About 1 hr
Maximum Inclination Angle	3
Frequency of Data Refresh	10 Hz
Laser Wavelength	895-915 nm
Laser Power	25 W
Pulse Length	5 ns
Laser Safety Class	IEC-60825 Class 1
Power Voltage (spec table)	4.95-5.3 V
Power Input (label shown)	5-12 V DC
Power Voltage Ripple	50 mV
System Start Current	1200 mA
Power Current	650 mA
Weight	163 g
Working Temperature Range	-5 to 45 C

Applications

• Robot localization and navigation
• Environmental surveying and mapping
• Handheld mapping and re-localization in complicated scenarios

For integration and setup assistance (SDK/ROS, networking, power), contact [email protected] or visit https://rcdrone.top/.

Manuals

• SLAMTEC_MAPPER_M2M3_Kit_QUICK_START.pdf
• SLAMTEC_Mapper_M2M3_Introduction_and_Datasheet.pdf

Details

The SLAMTEC Mapper M2M3 combines a laser range scanner with a built-in SLAM engine for mapping and localization in one compact sensor.

SLAM graph optimization and SharpEdge mapping support high-quality results across larger environments, indoors or outdoors.

Plug-and-play USB power helps speed up bench testing, prototyping, and fast bring-up in robotics workflows.

ROS driver support and cross-platform SDK tools make it easier to stream range data and visualize maps in RViz.

Multiple connectivity optionsWiFi and 100M Ethernetsupport flexible integration and real-time data access.

A compact, low-power design supports multiple work modes and fits smoothly into the SLAMTEC ecosystem.