Lanbao CPES | Color Sensor Controller

Lanbao CPES – color sensor controller

The Lanbao CPES is a color sensor controller built for multi-channel color evaluation in industrial automation equipment. Lanbao’s official specification lists the product-specific detection or measuring range, NPN; PNP (based on current SKU options), 24VDC, Ripple(P-P): 10% supply, and See selected SKU. This OpenELAB listing summarizes the product family for selectable SKUs, so always match the required output and connection against the variant name before ordering.

For selection, confirm the sensing principle, range, output type, connection style, response time, protection rating, and accessory set against the exact SKU. Use the SKU code on the order page as the final reference for output polarity and cable style. If you are comparing nearby Lanbao models, also review Lanbao LAP, Lanbao LAU, and Lanbao UR18-CC15 so the housing style, measurement method, and control output match the machine input.

Technical Specifications

Parameter	Value
Model family	CPES
Sensor type	color sensor controller
Detection / measuring range	See selected SKU
Sensing method	multi-channel color evaluation
Output configuration	NPN; PNP (based on current SKU options)
Supply voltage	24VDC, Ripple(P-P): 10%
Response time	200S(HIGH SPEED)/1ms(FINE)/4ms(TURBO)/8ms(SUPER)
Load / output current	Normal mode: 1.5W(62.5mA),Eco mode: 1W(42mA)
Connection	See selected SKU
Protection rating	See official specification
Material	HousingCover: PC
Operating temperature	-10…55(No condensation )
Indicator	See official specification

Board Layout & Label Guide

• Optical sensing face – Keep the active face clean and align it to the target path required by multi-channel color evaluation.
• Output indicator – Use the LED indication to confirm power, switching state, and any short-circuit or overload warning described by the official specification.
• Connection area – See selected SKU; route the cable or connector with strain relief before final commissioning.
• Supply input – Wire the sensor only within 24VDC, Ripple(P-P): 10%; confirm polarity before applying power.
• Output selection – Match the selected SKU to this listing’s output coverage: NPN; PNP (based on current SKU options).
• Adjustment / teach control – Use the controls described for the selected SKU; set the distance or threshold after the sensor is mounted in its final position.
• Mounting body – Use the listed accessory hardware and avoid mechanical stress on the lens, slot, or transducer surface.
• Protection rating – See official specification; maintain sealing around the cable entry or connector during installation.

Packing List

• 1 x Lanbao CPES sensor for the selected SKU
• Mounting hardware or accessories as supplied with the selected warehouse batch
• Product documentation and official specification reference
• Current store bundle contents may vary by SKU and warehouse batch

FAQ

Q: What is the main function of the Lanbao CPES?
A: It is a color sensor controller for multi-channel color evaluation, with the range and output behavior defined by the selected SKU.

Q: Which power supply should I use?
A: Use 24VDC, Ripple(P-P): 10% and confirm the sensor wiring before applying power.

Q: Which output type should I order?
A: Choose the SKU that matches the controller input. Current output coverage for this listing is: NPN; PNP (based on current SKU options).

Q: Does the sensing distance always equal the rated value?
A: Use the rated range as the official reference, then validate with the real target, mounting angle, and surface condition.

Q: What should I check before commissioning?
A: Check supply voltage, output wiring, target alignment, LED status, mounting stability, and the selected distance or teach setting.

Q: Can I use it in wet or dusty equipment?
A: The official protection rating is See official specification. Keep the connector, cable outlet, and sensing face sealed as installed.

Q: Is the product sold as all variants together?
A: No. Select the required SKU from the store options; the title and description summarize the compatible product family.

Q: Where should I verify final parameters?
A: Use the official Lanbao specification page and the SKU shown on your OpenELAB order.