Lanbao PSE-YC35 | Laser BGS Sensor | 35cm

Lanbao PSE-YC35 – laser background-suppression sensor

The Lanbao PSE-YC35 is a laser background-suppression sensor built for laser background-suppression detection in industrial automation equipment. Lanbao’s official specification lists 35cm, NPN NO+NC; PNP NO+NC (based on current SKU options), 10…30 VDC, Ripple<10%Vp-p supply, and M8 4-pin connector/2m PVC cable. This OpenELAB listing summarizes the product family for selectable SKUs, so always match the required output and connection against the variant name before ordering.

For selection, confirm the sensing principle, range, output type, connection style, response time, protection rating, and accessory set against the exact SKU. Use the SKU code on the order page as the final reference for output polarity and cable style. If you are comparing nearby Lanbao models, also review Lanbao PSE-YC15, Lanbao PSE-TM30, and Lanbao PSW-TC50 so the housing style, measurement method, and control output match the machine input.

Technical Specifications

Parameter	Value
Model family	PSE-YC35
Sensor type	laser background-suppression sensor
Detection / measuring range	35cm
Sensing method	Background suppression
Output configuration	NPN NO+NC; PNP NO+NC (based on current SKU options)
Supply voltage	10…30 VDC, Ripple<10%Vp-p
Response time	T-on: 0.5ms; T-off: 0.5ms
Light source	Red laser(650nm) Class1
Load / output current	100mA
Connection	M8 4-pin connector/2m PVC cable
Protection rating	IP67
Material	Housing: PC+ABS; Optical elements: Plastic PMMA
Operating temperature	-10C …50C(no icing, no condensation)
Indicator	Green light: power indicator,Yellow light: output, overload or short circuit(flicker)

Board Layout & Label Guide

• Optical sensing face – Keep the active face clean and align it to the target path required by laser background-suppression detection.
• Output indicator – Use the LED indication to confirm power, switching state, and any short-circuit or overload warning described by the official specification.
• Connection area – M8 4-pin connector/2m PVC cable; route the cable or connector with strain relief before final commissioning.
• Supply input – Wire the sensor only within 10…30 VDC, Ripple<10%Vp-p; confirm polarity before applying power.
• Output selection – Match the selected SKU to this listing’s output coverage: NPN NO+NC; PNP NO+NC (based on current SKU options).
• Adjustment / teach control – Multi-turn knob adjustment; set the distance or threshold after the sensor is mounted in its final position.
• Mounting body – Use the listed accessory hardware and avoid mechanical stress on the lens, slot, or transducer surface.
• Protection rating – IP67; maintain sealing around the cable entry or connector during installation.

Packing List

• 1 x Lanbao PSE-YC35 sensor for the selected SKU
• Mounting hardware or accessories as supplied with the selected warehouse batch
• Product documentation and official specification reference
• Current store bundle contents may vary by SKU and warehouse batch

FAQ

Q: What is the main function of the Lanbao PSE-YC35?
A: It is a laser background-suppression sensor for laser background-suppression detection, with the range and output behavior defined by the selected SKU.

Q: Which power supply should I use?
A: Use 10…30 VDC, Ripple<10%Vp-p and confirm the sensor wiring before applying power.

Q: Which output type should I order?
A: Choose the SKU that matches the controller input. Current output coverage for this listing is: NPN NO+NC; PNP NO+NC (based on current SKU options).

Q: Does the sensing distance always equal the rated value?
A: Use 35cm as the official reference, then validate with the real target, mounting angle, and surface condition.

Q: What should I check before commissioning?
A: Check supply voltage, output wiring, target alignment, LED status, mounting stability, and the selected distance or teach setting.

Q: Can I use it in wet or dusty equipment?
A: The official protection rating is IP67. Keep the connector, cable outlet, and sensing face sealed as installed.

Q: Is the product sold as all variants together?
A: No. Select the required SKU from the store options; the title and description summarize the compatible product family.

Q: Where should I verify final parameters?
A: Use the official Lanbao specification page and the SKU shown on your OpenELAB order.