Audeze LCD-4z Headphones

The LCD-4z is engineered with a new magnesium housing to produce a light-weight, visually appealing headphone, the LCD-4z maintains the sound signature of LCD-4. The LCD-4z features a dark sleek aesthetic with gold accents. The magnesium rings of the LCD-4z are designed to be strong, lightweight, and non-resonant for a very clean output. The LCD-4z features our most advanced diaphragm design. Benefits include faster response for better transient/impulse response, imaging, and the flattest, deepest, most accurate bass response of any headphone available.

Double Fluxor Magnet Arrays bring the magnetic flux to 1.5 Tesla, nearly doubling the power driving the diaphragm for improved transient response and far greater resolution. Combining our Fluxor magnet arrays, nano-scale diaphragm, Fazors, Uniforce voice coil, and other features, the LCD-4 and LCD-4z give you even lower distortion and greater accuracy – usually 1/10th the distortion of conventional headphones.The LCD-4z headphone is thoroughly engineered and meticulously hand-built using the finest materials combined with cutting-edge planar magnetic technology. We closely match transducers to within +/- 1 dB.

Features

• Planar magnetic drivers for better dynamics and frequency response
• Premium leather for style and durability

Audeze Technology

• Flux density 1.5 Tesla
• Large ultra-thin nano grade Uniforce diaphragms
• Double Fluxor magnetic arrays
• Fazorelements

The Audeze LCD Series Premium cable features cryogenically treated four conductor stranded wire, each wire consisting of a large number of extremely fine strands of single-crystal OCC copper with a combined cross section equivalent to AWG 20 that ensures low resistance and negligible signal loss. The white/black cable uses silver-plated copper strands. Crystals within strands are oriented in a specific pattern to provide the best possible signal transmission.

• Very flexible, tangle free
• Non-microphonic jacket
• Length: 2.5m; Weight: 110 g

Connectors:

• 1/4″ (6.3mm) stereo OR 4-pin balanced XLR plug for connection to amplifier
• 2 x 4-pin mini XLR for headphone earcup connection

Electrical Specifications:

• Resistance: 12 milliohms per foot
• Capacitance: 10 picofarads per foot
• Inductance: 0.15 microhenrys per foot
• Dielectric strength: 1000V

PLEASE indicate choice of Balanced 4 pin XLR or 6.3mm Single Ended Connector in the check out notes. Thank you.

LCD-4z Specifications:

Style	Over-ear, open-back
Transducer type	Planar magnetic
Magnetic structure	Proprietary magnet array
Phase management	FAZOR
Magnet type	Neodymium N50
Diaphragm type	Nano-scale Uniforce
Transducer size	106 mm
Maximum power handling	15W
Maximum SPL	>130dB
Frequency response	5Hz 20kHz
THD	<0.1% @ 100dB
Impedance	15 ohms
Sensitivity	98 dB/1mW (at Drum Reference Point)
Voltage sensitivity	107 dB/1V (at Drum Reference Point)
Minimum power requirement	>100mW
Recommended power level	1 – 4W