Lanbao CR18S M18 5/8mm Plastic Capacitive Sensor

Lanbao CR18S M18 5/8mm Plastic Capacitive Sensor

Lanbao CR18S Series is an M18 plastic cylindrical capacitive proximity sensor for non-contact object detection in industrial automation equipment. Compared with the metal-housing CR18 series, the CR18S uses a PBT housing while keeping the same M18 format, adjustable sensing-distance options, and DC output configurations.

This listing covers CR18SCF05 and CR18SCN08 DC variants with 5mm flush or 8mm non-flush adjustable rated sensing distance. Store variants include NPN or PNP output, normally-open, normally-closed, or NO+NC output logic, and either fixed 2m PVC cable or E2 M12 connector wiring.

For related Lanbao capacitive sensors, compare the Lanbao CR18 Metal Series, Lanbao CR12S Series, and Lanbao CR30S Series. For AC 2-wire M18 wiring, see the Lanbao CR18-AC 2-Wire Sensor.

Technical Specifications

Brand	Lanbao
Series	CR18S Series
Sensor Type	Cylindrical capacitive proximity sensor
Housing Size	M18 plastic cylindrical housing
Housing Material	PBT
Mounting Options	Flush or non-flush, depending on selected variant
Rated Sensing Distance	5mm adjustable for CR18SCF05 variants; 8mm adjustable for CR18SCN08 variants
Assured Operating Distance	0-4mm for 5mm variants; 0-6.4mm for 8mm variants
Cable-Type Dimensions	M18 x 70mm for flush cable versions; M18 x 78mm for non-flush cable versions
Connector-Type Dimensions	M18 x 83.5mm for flush E2 connector versions; M18 x 91.5mm for non-flush E2 connector versions
Power Supply	10-30V DC
Output Type	NPN or PNP, depending on selected variant
Output Logic	Normally open, normally closed, or NO+NC, depending on selected variant
Standard Target	Fe 18 x 18 x 1t for 5mm versions; Fe 24 x 24 x 1t for 8mm versions
Switch-Point Offset	<=+/-20% of rated sensing distance reference
Hysteresis Range	3-20% of rated sensing distance reference
Repeat Accuracy	<=3% reference
Load Current Reference	<=200mA
Residual Voltage Reference	<=2.5V
Current Consumption Reference	<=15mA
Circuit Protection	Short-circuit, overload, and reverse-polarity protection reference
Output Indicator	Yellow LED
Operating Temperature	-25C to 70C
Operating Humidity	35-95%RH reference
Switching Frequency	50Hz
Voltage Withstand	1000V AC 50/60Hz for 60s reference
Insulation Resistance	>=50MOhm at 500V DC reference
Vibration Resistance	10-55Hz, dual amplitude 1mm reference
Protection Rating	IP67
Connection Options	2m PVC cable or E2 M12 connector, depending on selected variant
Available Store SKUs	CR18SCF05DNO, CR18SCF05DNC, CR18SCF05DNR, CR18SCF05DPO, CR18SCF05DPC, CR18SCF05DPR, CR18SCN08DNO, CR18SCN08DNC, CR18SCN08DNR, CR18SCN08DPO, CR18SCN08DPC, CR18SCN08DPR, plus matching E2 connector versions

Integration Notes & Hardware Guidance

• Sensing-distance selection: Choose CR18SCF05 for 5mm flush mounting or CR18SCN08 for 8mm non-flush sensing distance.
• Housing selection: Choose CR18S when a PBT plastic M18 housing is preferred over the metal CR18 housing.
• Material behavior: Capacitive sensing depends on target material, size, grounding, moisture, and installation conditions; test the actual target before final installation.
• Output selection: Match NPN or PNP wiring to the input type of your PLC, controller, counter, or I/O module before ordering.
• Connection choice: Select fixed 2m PVC cable versions for direct wiring or E2 M12 connector versions when quick replacement and standardized cables are preferred.

Packing List

Item	Qty	Notes
Lanbao CR18S capacitive proximity sensor	1	Selected sensing distance, output type, output logic, and cable or E2 connector variant
Original product packaging	1	Packaging may vary by shipment batch

FAQ

What is the difference between CR18S and CR18?

The CR18S series uses a PBT plastic M18 housing, while the CR18 series uses a metal M18 cylindrical housing.

What sensing distances are available?

This listing includes 5mm adjustable flush variants and 8mm adjustable non-flush variants.

How do I choose between NPN and PNP?

Choose the output type required by your controller input. NPN and PNP wiring are not interchangeable unless the receiving device supports both input standards.

What is the difference between cable and E2 versions?

Cable versions use a fixed 2m PVC cable, while E2 versions use an M12 connector for detachable wiring and easier sensor replacement.

When should I choose the CR18S instead of the CR12S?

Choose the CR18S when you need a larger M18 plastic housing and longer adjustable sensing distance than the smaller M12 CR12S series.