Lanbao LE80XZ-D Low-Temp 40/50mm Terminal Inductive Sensor

Lanbao LE80XZ-D Low-Temp 40/50mm Terminal Inductive Sensor

Lanbao LE80XZ-D Low Temperature Resistant Series is a large square inductive proximity sensor with terminal wiring for non-contact metal detection in cold industrial environments, refrigeration equipment, outdoor machinery, conveyors, material-handling systems, and heavy-duty control cabinets. The LE80 housing provides long sensing distance while supporting low-temperature operation where standard sensors may be unsuitable.

This listing covers LE80XZSF40W1-D and LE80XZSN50W1-D DC variants with 40mm flush or 50mm non-flush rated sensing distance. Depending on the selected part number, the sensor is available with NPN or PNP output and normally-open, normally-closed, or NO+NC logic.

For related Lanbao inductive sensors, compare the Lanbao LE40XZ-D Low-Temp Sensor, Lanbao LE40XZ-E2 Low-Temp Sensor, and Lanbao LE80XZ-D Standard Sensor. For extended-distance terminal variants, see the Lanbao LE80XZ-Y-D Terminal Sensor.

Technical Specifications

Brand	Lanbao
Series	LE80XZ-D Low Temperature Resistant Series
Product Series	Temperature extended series
Sensor Type	Large square inductive proximity sensor
Body Size	40 x 80 x 98mm
Housing Material	PBT
Installation Options	Flush 40mm or non-flush 50mm, depending on selected variant
Rated Sensing Distance	40mm for LE80XZSF40W1-D variants; 50mm for LE80XZSN50W1-D variants
Assured Operating Distance	0-32mm for 40mm variants; 0-40mm for 50mm variants
Power Supply	10-30V DC
Output Type	DC 3-wire or 4-wire NPN / PNP, depending on selected variant
Output Logic	Normally open, normally closed, or NO+NC
Standard Target	Fe 120 x 120 x 1t for 40mm versions; Fe 150 x 150 x 1t for 50mm versions
Switching Frequency	100Hz for 40mm versions; 50Hz for 50mm versions
Switch-Point Drift	<=+/-10% of sensing distance reference
Hysteresis Range	1-20% of sensing distance reference
Repeat Accuracy	<3% reference
Load Current Reference	<200mA
Residual Voltage Reference	<2.5V
Current Consumption Reference	<=15mA
Circuit Protection	Short-circuit, overload, and reverse-polarity protection reference
Output Indicator	Yellow LED
Operating Temperature	-40C to 70C
Operating Humidity	35-95%RH reference
Voltage Withstand	1000V AC 50/60Hz for 60s reference
Insulation Resistance	>=50MOhm at 500V DC reference
Vibration Resistance	10-50Hz, 1.5mm reference
Protection Rating	IP67 reference
Connection Type	Terminal connector
Available Variants	LE80XZSF40DNOW1-D, LE80XZSF40DNCW1-D, LE80XZSF40DNRW1-D, LE80XZSF40DPOW1-D, LE80XZSF40DPCW1-D, LE80XZSF40DPRW1-D, LE80XZSN50DNOW1-D, LE80XZSN50DNCW1-D, LE80XZSN50DNRW1-D, LE80XZSN50DPOW1-D, LE80XZSN50DPCW1-D, LE80XZSN50DPRW1-D

Integration Notes & Hardware Guidance

• Temperature range: Use this W1 low-temperature version when the installation requires operation below the standard LE80XZ temperature range.
• Distance selection: Choose the LE80XZSF40W1-D flush version for 40mm sensing where surrounding metal clearance is limited, or the LE80XZSN50W1-D non-flush version for longer 50mm sensing distance.
• Output selection: Match NPN or PNP wiring to the input type of your PLC, controller, counter, or I/O module before ordering.
• Logic selection: Choose normally open, normally closed, or NO+NC based on the required signal state when a metal target is detected.
• Terminal wiring: Confirm terminal connection space, cable gland direction, and cabinet clearance before installation.

Packing List

Item	Qty	Notes
Lanbao LE80XZ-D low-temperature inductive proximity sensor	1	Selected sensing distance, output type, and output logic variant
Original product packaging	1	Packaging may vary by shipment batch

FAQ

What does the LE80XZ-D low-temperature sensor detect?

It detects metal targets using inductive proximity sensing, without physical contact with the target.

What operating temperature range does this version support?

This low-temperature resistant version is listed with an operating temperature reference of -40C to 70C.

What sensing distances are available?

This listing includes 40mm flush variants and 50mm non-flush variants. Select the version that matches your mounting condition and detection distance.

How do I choose between NPN and PNP?

Choose the output type required by your controller input. NPN and PNP wiring are not interchangeable unless the receiving device supports both input standards.

What connection does this D version use?

The LE80XZ-D low-temperature series uses a terminal connector for field wiring in industrial equipment.