Lanbao LE80XZ-Y-E2 DC 50/70mm M12 Inductive Sensor

Lanbao LE80XZ-Y-E2 DC 50/70mm M12 Inductive Sensor

Lanbao LE80XZ-Y-E2-DC 3/4-Wire Series is an extended-distance large square inductive proximity sensor with an M12 connector for non-contact metal detection in industrial automation equipment, conveyors, machine-position feedback systems, material-handling equipment, and heavy-duty control cabinets. The LE80 housing provides long sensing distance while the connector format supports detachable wiring and easier maintenance.

This listing covers LE80XZSF50Y-E2 and LE80XZSN70Y-E2 DC variants with 50mm quasi-flush or 70mm non-flush rated sensing distance. The store variants listed here use NPN or PNP NO+NC output logic, providing both normally-open and normally-closed signal states from one sensor.

For related Lanbao inductive sensors, compare the Lanbao LE80XZ-Y-D Terminal Sensor, Lanbao LE80XZ-DC M12 Sensor, and Lanbao LE40XZ-Y-E2 M12 Sensor. For a terminal-wired LE80 option, see the Lanbao LE80XZ-D Terminal Sensor.

Technical Specifications

Brand	Lanbao
Series	LE80XZ-Y-E2-DC 3/4-Wire Series
Product Series	Standard function series
Sensor Type	Extended-distance large square inductive proximity sensor
Body Size	40 x 80 x 104mm reference
Housing Material	PBT
Installation Options	Quasi-flush 50mm or non-flush 70mm, depending on selected variant
Rated Sensing Distance	50mm for LE80XZSF50Y-E2 variants; 70mm for LE80XZSN70Y-E2 variants
Assured Operating Distance	0-40mm for 50mm variants; 0-56mm for 70mm variants
Power Supply	10-30V DC
Store Variant Output Type	DC 4-wire NPN or PNP, depending on selected variant
Store Variant Output Logic	NO+NC combined output
Standard Target	Fe 150 x 150 x 1t for 50mm versions; Fe 210 x 210 x 1t for 70mm versions
Switching Frequency	50Hz for 50mm versions; 30Hz for 70mm versions
Switch-Point Drift	<=+/-10% of sensing distance reference
Hysteresis Range	1-20% of sensing distance reference
Repeat Accuracy	<=3% reference
Load Current Reference	<=200mA
Residual Voltage Reference	<=2.5V
Current Consumption Reference	<=10mA
Circuit Protection	Short-circuit, overload, and reverse-polarity protection reference
Output Indicator	Yellow LED
Operating Temperature	-25C to 70C
Operating Humidity	35-95%RH reference
Voltage Withstand	1000V AC 50/60Hz for 60s reference
Insulation Resistance	>=50MOhm at 500V DC reference
Vibration Resistance	10-50Hz, 1.5mm reference
Protection Rating	IP67 reference
Connection Type	M12 connector
Available Store Variants	LE80XZSF50DNRY-E2, LE80XZSN70DNRY-E2, LE80XZSF50DPRY-E2, LE80XZSN70DPRY-E2

Integration Notes & Hardware Guidance

• Connector planning: This E2 version uses an M12 connector, so confirm cable type, pinout, and installation clearance before replacing a terminal or fixed-cable sensor.
• Distance selection: Choose the LE80XZSF50Y-E2 quasi-flush version for 50mm sensing where surrounding metal clearance is limited, or the LE80XZSN70Y-E2 non-flush version for longer 70mm sensing distance.
• Output selection: Choose NPN or PNP according to the input type of your PLC, controller, counter, or I/O module.
• NO+NC wiring: These store variants provide both normally-open and normally-closed outputs, so wire only the signal state required by your control logic.
• Target setup: Sensing distance depends on target material, size, thickness, mounting conditions, and nearby metal. Confirm switching distance in the final machine structure.

Packing List

Item	Qty	Notes
Lanbao LE80XZ-Y-E2-DC 3/4-wire square inductive proximity sensor	1	Selected sensing distance and NPN / PNP NO+NC output variant
Original product packaging	1	Packaging may vary by shipment batch

FAQ

What does the LE80XZ-Y-E2 sensor detect?

It detects metal targets using inductive proximity sensing, without physical contact with the target.

What is the difference between LE80XZSF50Y-E2 and LE80XZSN70Y-E2?

LE80XZSF50Y-E2 variants use a 50mm rated quasi-flush sensing distance, while LE80XZSN70Y-E2 variants use a 70mm rated non-flush sensing distance.

How do I choose between NPN and PNP?

Choose the output type required by your controller input. NPN and PNP wiring are not interchangeable unless the receiving device supports both input standards.

What does NO+NC output mean?

NO+NC means the sensor provides both normally-open and normally-closed signal outputs, allowing you to wire the signal state required by your machine logic.

What connection does this E2 version use?

The LE80XZ-Y-E2-DC 3/4-wire series uses an M12 connector for detachable wiring and easier maintenance.