Lanbao PDB-CM | Laser Distance Sensor | 0.2-8m

Lanbao PDB-CM – laser distance sensor

The Lanbao PDB-CM is a laser distance sensor built for laser distance measurement in industrial automation equipment. Lanbao’s official specification lists 0.2…8m, RS-485; 4…20mA; 0…10V (based on current SKU options), RS-485:10…30VD;4…20mA/0…10V:12…24VDC supply, and RS-485: 2m 5pins PVC cable;4…20mA: 2m 4pins PVC cable. This OpenELAB listing summarizes the product family for selectable SKUs, so always match the required output and connection against the variant name before ordering.

For selection, confirm the sensing principle, range, output type, connection style, response time, protection rating, and accessory set against the exact SKU. Use the SKU code on the order page as the final reference for output polarity and cable style. If you are comparing nearby Lanbao models, also review Lanbao PDB-CC10, Lanbao PDB-CC50, and Lanbao PDB-CC100 so the housing style, measurement method, and control output match the machine input.

Technical Specifications

Parameter	Value
Model family	PDB-CM
Sensor type	laser distance sensor
Detection / measuring range	0.2…8m
Sensing method	laser distance measurement
Output configuration	RS-485; 4…20mA; 0…10V (based on current SKU options)
Supply voltage	RS-485:10…30VD;4…20mA/0…10V:12…24VDC
Response time	See official specification
Light source	Infrared laser(850nm); Laser level: Class 3R
Load / output current	50mA
Connection	RS-485: 2m 5pins PVC cable;4…20mA: 2m 4pins PVC cable
Protection rating	IP67
Material	Housing: ABS; Lens cover: PMMA
Operating temperature	Operating temperature:-10…+50
Indicator	Power indicator: Green LED;

Board Layout & Label Guide

• Laser emission and receiving window – Keep the active face clean and align it to the target path required by laser distance measurement.
• Output indicator – Use the LED indication to confirm power, switching state, and any short-circuit or overload warning described by the official specification.
• Connection area – RS-485: 2m 5pins PVC cable;4…20mA: 2m 4pins PVC cable; route the cable or connector with strain relief before final commissioning.
• Supply input – Wire the sensor only within RS-485:10…30VD;4…20mA/0…10V:12…24VDC; confirm polarity before applying power.
• Output selection – Match the selected SKU to this listing’s output coverage: RS-485; 4…20mA; 0…10V (based on current SKU options).
• Adjustment / teach control – Button to lock; button to unlock; action point setting;; set the distance or threshold after the sensor is mounted in its final position.
• Mounting body – Use the listed accessory hardware and avoid mechanical stress on the lens, slot, or transducer surface.
• Protection rating – IP67; maintain sealing around the cable entry or connector during installation.

Packing List

• 1 x Lanbao PDB-CM sensor for the selected SKU
• Screw(M435mm)2, Nut2, Washer2,
• Product documentation and official specification reference
• Current store bundle contents may vary by SKU and warehouse batch

FAQ

Q: What is the main function of the Lanbao PDB-CM?
A: It is a laser distance sensor for laser distance measurement, with the range and output behavior defined by the selected SKU.

Q: Which power supply should I use?
A: Use RS-485:10…30VD;4…20mA/0…10V:12…24VDC and confirm the sensor wiring before applying power.

Q: Which output type should I order?
A: Choose the SKU that matches the controller input. Current output coverage for this listing is: RS-485; 4…20mA; 0…10V (based on current SKU options).

Q: Does the sensing distance always equal the rated value?
A: Use 0.2…8m as the official reference, then validate with the real target, mounting angle, and surface condition.

Q: What should I check before commissioning?
A: Check supply voltage, output wiring, target alignment, LED status, mounting stability, and the selected distance or teach setting.

Q: Can I use it in wet or dusty equipment?
A: The official protection rating is IP67. Keep the connector, cable outlet, and sensing face sealed as installed.

Q: Is the product sold as all variants together?
A: No. Select the required SKU from the store options; the title and description summarize the compatible product family.

Q: Where should I verify final parameters?
A: Use the official Lanbao specification page and the SKU shown on your OpenELAB order.