Lanbao PSV-YR | Background Suppression | 15mm

Lanbao PSV-YR – background-suppression photoelectric sensor

The Lanbao PSV-YR is a background-suppression photoelectric sensor built for background-suppression detection in industrial automation equipment. Lanbao’s official specification lists 15mm, NPN NO; NPN NC; PNP NO; PNP NC (based on current SKU options), 10…30V DC supply, and 2m PVC cable. This OpenELAB listing summarizes the product family for selectable SKUs, so always match the required output and connection against the variant name before ordering.

For selection, confirm the sensing principle, range, output type, connection style, response time, protection rating, and accessory set against the exact SKU. Use the SKU code on the order page as the final reference for output polarity and cable style. If you are comparing nearby Lanbao models, also review Lanbao PSV-TM, Lanbao SPM-WB, and Lanbao SPM-RGB so the housing style, measurement method, and control output match the machine input.

Technical Specifications

Parameter	Value
Model family	PSV-YR
Sensor type	background-suppression photoelectric sensor
Detection / measuring range	15mm
Sensing method	background-suppression detection
Output configuration	NPN NO; NPN NC; PNP NO; PNP NC (based on current SKU options)
Supply voltage	10…30V DC
Response time	<1ms
Light source	Red light
Load / output current	50mA
Connection	2m PVC cable
Protection rating	IP65
Material	PC+PBT
Operating temperature	-20…55 C
Indicator	Green:power,stable indicator;Yellow:output indicator

Board Layout & Label Guide

• Optical sensing face – Keep the active face clean and align it to the target path required by background-suppression detection.
• Output indicator – Use the LED indication to confirm power, switching state, and any short-circuit or overload warning described by the official specification.
• Connection area – 2m PVC cable; route the cable or connector with strain relief before final commissioning.
• Supply input – Wire the sensor only within 10…30V DC; confirm polarity before applying power.
• Output selection – Match the selected SKU to this listing’s output coverage: NPN NO; NPN NC; PNP NO; PNP NC (based on current SKU options).
• Adjustment / teach control – Use the controls described for the selected SKU; set the distance or threshold after the sensor is mounted in its final position.
• Mounting body – Use the listed accessory hardware and avoid mechanical stress on the lens, slot, or transducer surface.
• Protection rating – IP65; maintain sealing around the cable entry or connector during installation.

Packing List

• 1 x Lanbao PSV-YR sensor for the selected SKU
• Screws(M28mm)2Nut2
• Product documentation and official specification reference
• Current store bundle contents may vary by SKU and warehouse batch

FAQ

Q: What is the main function of the Lanbao PSV-YR?
A: It is a background-suppression photoelectric sensor for background-suppression detection, with the range and output behavior defined by the selected SKU.

Q: Which power supply should I use?
A: Use 10…30V DC and confirm the sensor wiring before applying power.

Q: Which output type should I order?
A: Choose the SKU that matches the controller input. Current output coverage for this listing is: NPN NO; NPN NC; PNP NO; PNP NC (based on current SKU options).

Q: Does the sensing distance always equal the rated value?
A: Use 15mm as the official reference, then validate with the real target, mounting angle, and surface condition.

Q: What should I check before commissioning?
A: Check supply voltage, output wiring, target alignment, LED status, mounting stability, and the selected distance or teach setting.

Q: Can I use it in wet or dusty equipment?
A: The official protection rating is IP65. Keep the connector, cable outlet, and sensing face sealed as installed.

Q: Is the product sold as all variants together?
A: No. Select the required SKU from the store options; the title and description summarize the compatible product family.

Q: Where should I verify final parameters?
A: Use the official Lanbao specification page and the SKU shown on your OpenELAB order.